180/90 Degree Peel Tensile Strength Testing Equipment
Product Description
Peel tensile strength testing equipment tests the tensile strength, compressive strength and elongation of various materials, semi-finished products and finished products. It can be used for stripping, tearing, bending resistance, bending resistance, compression and other tests. It can also be used for testing the stripping force of composite films at 90 degrees and 180 degrees
Product Info
Minorder | 1 |
---|---|
Supplyability | 30 sets/Month |
Place | Guangdong, China |
Packaging | Each set protected with resin fiber and PP film, then put into Strong wooden case with operation manual and video inside. |
Product Detail
The Product Brief Introduction
Peel tensile strength testing equipment tests the tensile strength, compressive strength and elongation of various materials, semi-finished products and finished products. It can be used for stripping, tearing, bending, bending, compression and other tests. It is suitable for metal, plastic, rubber, textile, synthetic chemicals, wire and cable, leather and other industries.
Design standards:GB/T 16491、GB/T 1040、GB/T 8808、JC/T 777、QB/T 2171、HG/T 2538、CNS 11888、JIS K6854、PSTC-7、ISO 37、AS 1180.2、BS EN 1979 ......
Standard Features
Applications
Peel tensile strength testing equipment tests the tensile strength, compressive strength and elongation of various materials, semi-finished products and finished products. It can be used for stripping, tearing, bending, bending, compression and other tests. It is suitable for metal, plastic, rubber, textile, synthetic chemicals, wire and cable, leather and other industries.
Design standards:GB/T 16491、GB/T 1040、GB/T 8808、JC/T 777、QB/T 2171、HG/T 2538、CNS 11888、JIS K6854、PSTC-7、ISO 37、AS 1180.2、BS EN 1979 ......
Standard Features
Item | Description |
Frame capacity | 500kg |
Load cell brand | China brand, 500kg (5,10,50,100,200kg are optional) |
Load accuracy | 1% F.S |
Control system | LCD with build-in printer /PC with windows 7 system |
Motor | Adjustable-speed motor with reduction box, high-precision mechanical ball screw rod |
Force reading | kgf, Ibf, N, KN, T etc |
Vertical test space | 1400mm including fixture |
Test speed | 50~300mm/min (adjustable by rotary knob) |
Software | TM 2101 |
Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… |
Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
Applications
- Tested sample: plastic films, laminated materials, adhesive tapes, adhesive bandage (plaster), release paper, plastic films, leather, rubber & plastic, paper, fiber, etc.
- Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force.
- Deformation under defined load: Test deformation under defined load of tested sample
- Load under defined deformation: Test load under defined deformation of tested sample
- Software can issue word/excel report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.